TMC Cancela Forestry

TMC Cancela - Forestry

We've listed below some of the TMC forestry mulchers. For the wider forestry range please visit the TMC Cancela website.

TFS  Forestry mulcher with fixed hammers

The TFS forestry mulcher is suitable for mulching low trees, branches as well as smaller diameter stumps left after logging. The degree of cut of this brush shredder is very high, obtaining in some cases sawdust. Its replaceable hammers, made of special alloys and hard metal, were designed and patented by TMC Cancela. The special design of this tree mulcher provides an excellent penetration in forest material and a long working lifetime.

  • Rotor with fixed hammers with tungsten carbide for great strength and durability
  • Adjustable in height side skids
  • Three point linkage to tractor
  • 6 high performance belts 
  • Electronically balanced rotor assembled with self aligning spherical roller bearings
  • Hydraulic rear hood
  • Front and rear replaceable protection chains
  • Functional and compact design
  • Reinforced mainframe
  • PTO to 540 rpm. 
  • Anticorrosive and electrostatic paint (double layer)
    Optional
  • Mechanical fixed rear frame

Screen Shot 2016-03-14 at 11.17.03
Nb: Technical data listed above is based on the smallest and largest of this model available. For full technical data please contact us.

Domex    

TFK  Forestry mulcher

The TFK is special for crushing branches and trees, plus logging stumps. The degree of cut is extremely high, in some materials to obtain as product sawdust. The presence of stones in the ground does not prevent proper operation. Incorporating replaceable hammers, long lasting, made of special alloys and carbide, are specifically designed and patented by TMC CANCELA. Excellent penetration and long life.

  • Welded mainframe with double layer of high strength cold forming steel
  • Special design in the front for facilitating the input of the material
  • Front quadruple chains curtain + 1 extra curtain
  • Coupling to tractor Cat. II with incorporated quick hitch linkage balls
  • Hydraulic rear hood made of high strength steel (for facilitating the material entrance and obtaining the best finish in mulching)
  • Sidestep system in frame sides for overcoming obstacles
  • Adjustable in height rounded side skids (2 positions)
  • Rotor assembled with fixed hammers
  • Hammers assembled to the holders with two bolts
  • 10 XPB drive belts with ESB system
  • Gearbox with built-in freewheel and input to 1000 rpm (1”3/4 Z6)
  • Rotor assembled with self-aligning spherical roller bearings
  • Reinforced PTO shaft
  • Hammers with 2 carbide tips 
  • Hammer holders welded to the rotor with double helicoidal arrangement
    Optional
  • Mechanical rear frame
  • Hydraulic rear frame with raker teeth

Screen Shot 2016-03-14 at 11.17.13
Nb: Technical data listed above is based on the smallest and largest of this model available. For full technical data please contact us.

5+5 belts Domex    
     

TFT  Forestry mulcher

The TFT can mulch material up to 600 mm in diameter, leaving an even, professional finish on the ground. The range belongs to an elite line of mulchers which feature TRIADVANCE technology, which works in conjunction with existing TMC high-tech systems. This special configuration guarantees an excellent finish on any ground.

  • Body built in high strength steel with special design in the front for facilitating the input of the material
  • 4 chain curtains for front protection + 4 extra chain curtains in the middle
  • Coupling to tractor Cat. III with fast coupling balls
  • Hydraulic hood with "Superfinish" system
  • Sidestep system on body sides for overcoming obstacles
  • Skids with 2 height positions and side protection
  • Rotor with replaceable shafts, with fixed hammers with helical disposition
  • Hammers with carbide tips and different configurations
  • Transmission with 12 XPC belts and ESB system
  • Gearbox with built-in freewheel and input to 1000 rpm (1”3/4 Z6)
  • Reinforced PTO shaft
  • Replaceable counterblades on body frame and on hydraulic hood
    Optional
  • Mechanical rear pushing frame
  • Hydraulic rear pushing frame with raker teeth
  • Turbo Kit
  • Skids for deeper work (*This option excludes the Turbo Kit)

Screen Shot 2016-03-14 at 11.17.43
Nb: Technical data listed above is based on the smallest and largest of this model available. For full technical data please contact us.

6X6 BELTS Domex    
     

R4 Forestry mulcher 

Machine designed for all types of forestry work such as crushing bushes, tall weeds, pruning (tree farming) and forestry cleanings. Its high robustness and reliability makes it a very versatile machine able to adapt to all terrains and works. 

    FIXED BASE MODEL

  • Folded steel sheet with welded reinforcements on the bottom face
  • Three point linkage made of steel sheet with tensión steel tube bars
  • Rear and front chain curtains for protection
  • Coupling to tractor Cat. II
  • Adjustable in height rounded skids with Widest system

     SHIFTING BASE MODEL

  • Three point linkage made of steel sheet with hydraulic cylinder and nylon bushings for displacement
  • Hydraulic hoses with external cover against scratches and protective connections for the fittings during storage.
  • 2 rotors with 2 cutting height levels
  • Replaceable connecting links for hooking the chains to the rotor
  • PTO shaft with clutch
  • PTO to 1000 rpm (1”3/4 Z6)
  • Special flexible rubber joints between gearboxes
  • 8 chains (4 pcs/rotor)
    Optional
  • Hydraulic rear hood
  • Mechanical rear frame

Screen Shot 2016-03-14 at 11.17.30
Nb: Technical data listed above is based on the smallest and largest of this model available. For full technical data please contact us.

                                                                                                             

MAIN MENU